Ships in 6-8 Weeks
ESR03EZPJ102
Datasheet
1MB
Specifications
| Digi-Key Part Number | 511-ESR03EZPJ102TR-ND – Tape & Reel (TR) |
| 511-ESR03EZPJ102CT-ND – Cut Tape (CT) | |
| 511-ESR03EZPJ102DKR-ND – Digi-Reel® | |
| Manufacturer | Rohm Semiconductor |
| Manufacturer Product Number | ESR03EZPJ102 |
| Description | RES SMD 1K OHM 5% 1/4W 0603 |
| Manufacturer Standard Lead Time | 52 Weeks |
| Detailed Description | 1 kOhms ±5% 0.25W, 1/4W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200, Pulse Withstanding Thick Film |
| Category | Resistors |
| Chip Resistor – Surface Mount | |
| Mfr | Rohm Semiconductor |
| Series | ESR |
| Package | Tape & Reel (TR) |
| Cut Tape (CT) | |
| Digi-Reel® | |
| Product Status | Active |
| Resistance | 1 kOhms |
| Tolerance | ±5% |
| Power (Watts) | 0.25W, 1/4W |
| Composition | Thick Film |
| Features | Automotive AEC-Q200, Pulse Withstanding |
| Temperature Coefficient | ±200ppm/°C |
| Operating Temperature | -55°C ~ 155°C |
| Package / Case | 0603 (1608 Metric) |
| Supplier Device Package | 603 |
| Ratings | AEC-Q200 |
| Size / Dimension | 0.063″ L x 0.031″ W (1.60mm x 0.80mm) |
| Height – Seated (Max) | 0.022″ (0.55mm) |
| Number of Terminations | 2 |
| Failure Rate | – |
Similar Parts
Lasterst News From BOMZON
Weekly Information of the Global Chip Industry
July 11 – July 17 GLOBALFOUNDRIES and STMicroelectronics confirm chip factory in France July 11 News, GlobalFoundries and STMicroelectronics announced ... Read more
2022.07.18 By
Admin
These three types of chips will hold up most of the semiconductor market in the second half of the year!
In the first half of 2022, the consumer electronics market is affected by the weakening of the economic effect of ... Read more
2022.07.18 By
Admin
Japan’s bad weather causes frequent accidents in semiconductor factories, and the supply of these two types of chips will be affected!
On July 12, Micron Technology reported that Micron’s DRAM factory in Hiroshima, Japan was affected by bad weather and experienced a long-term ... Read more
2022.07.18 By
Admin